Buying a house with a well comes with a number of benefits, from forgoing a monthly water bill to potentially having fresher water than regular city water. But it also comes with responsibility.
Before using a well, you need to know that you can safely drink and use its water. The previous owner may have used the water, but it’s still crucial that you know beyond a doubt that it’s safe for your family. That makes a well inspection a critical component of buying a house with a well. You can’t assume a well water’s purity — you have to know for sure.
Nearly all homes have one of two primary sources of water: well water or city water. When you’re house hunting, the seller or real estate agent will know which source a particular house uses. If it isn’t disclosed on the listing, just ask.
Like a home inspection, a well inspection is conducted by a professional. The inspector examines the well that serves as a home’s water source and ensures the water is safe to drink and use. The inspection should also verify that there is a suitable amount of water in the well.
Although having a well frees you from depending on city water, it doesn’t free you from state regulations. A licensed well inspector will also verify that the well meets your particular state’s criteria regulating personal wells.
A well inspection includes several tests but the two primary tests involve testing for water purity and water quantity.
Before getting to the actual water, though, the average well inspection begins with a visual analysis of the wellhead, well cap, pump, pressure tank, and grout. An inspector will also check the well casing, electrical wiring, jet pump, capacitor, and gauges for any obvious defects.
Unless your well is in really bad shape, this should be a pretty quick process. If the inspector identifies a significant issue, they may not even proceed with testing the water until you make repairs.
Water purity testing typically isn’t completed immediately. An inspector must take a water sample from the tap in your home and send it to a lab for testing. There, the lab will test
Once the test is completed, you’ll get a report detailing both the results of your water and the acceptable levels of each element found. Any VOCs found in your water will likely preclude you from using the well as they are a huge health hazard caused by artificial chemicals or gasoline compounds leaking into the well.
Nobody likes a dry well. To test the water quantity in the well, the inspector will measure the dimensions and depth of the well and conduct what’s known as a flow rate test. The flow rate measures the number of gallons per minute produced by your well.
The average home needs 100 to 120 gallons of water per person per day, which means the flow rate should be anywhere from six to 12 gallons per minute. This will ensure you have the water you need to meet your bathing, cooking, and washing needs.
If you’re buying a house in a rural area, there’s a good chance your home uses well water. Before buying a home, make sure you inspect the well. If there’s something wrong with it, you won’t get any help from the city — you’ll have to figure out the repairs yourself.
In most states, it’s the buyer’s responsibility to request a well inspection so don’t allow any offers to go through without one.
Most well inspections cost between $300 and $500 and are on the buyer’s dime. Some inspectors may also charge a travel fee if you’re in a very rural area and some labs may also charge an additional fee. It’s also recommended to include a septic inspection in your well inspection because the two systems are so interconnected. That can tack on another $100 to $900.
Although it’s expensive, getting a well inspection will save you a lot of hassle and it could save you some money, too. If the inspection shows a well in unsatisfactory shape, you could negotiate that the seller pays for repairs or takes some money off the price. If they resist, you probably shouldn’t go through with the purchase.
After purchasing a home with a well, you’re not simply done with inspections. Different states have different regulations, but it’s recommended that you inspect your well at least once a year for contaminants. In some areas, especially around construction or mining sites, you may want to check even more frequently.
There are other resources available to help you decide how frequently to get an inspection, too. The Environmental Protection Agency (EPA) publishes known water issues, and your real estate agent and neighbors may know about water concerns in the area, too.
Finding out you need a new well after buying a house can be a headache. Drilling a new well can cost anywhere from $3,000 to $15,000 depending on your location, soil conditions, and how deep the well must go to find a suitable water source.
That’s why it’s so important to get the well inspection done before you buy. You don’t want to deal with that additional cost after moving in. If a property needs a new well, it might not be worth the buy.
When you list with Orchard, we’ll get your home show-ready and make repairs to increase your home’s value at no upfront cost.
Orchard guarantees your home will sell, so you can buy your next one worry-free.
We provide peace of mind that your home will sell, plus list your home on the market to maximize your earnings.
Use our home sale calculator to estimate your net proceeds.
Our Home Advisors are experienced local agents who know how to sell for top dollar and help win your dream home.
All Orchard Home Advisors are experienced agents who know your local market inside and out. Request a consult today.
Did you know cash offers are 4x more likely to be chosen by a seller? Let us help you make one on your next home.
Get the most accurate free home valuation — in minutes
Orchard Home Loans shops the market to find your best rates.
A cash offer is 4x more likely to be chosen by a seller. Get qualified today.
Make a cash offer now, and Orchard will sell your old home after you move.
Tell us your must-haves to see personalized home recommendations that meet your criteria.